Steel Studs® - Maximum Span Wizard
Step: {{ step }} of {{ steps }}
I have the following information:
Stud Size
Stud BMT
Spacing
Spacing Type
Linings
Ceiling Span |
mm
|
Stud Size | |
Stud BMT | |
Spacing | |
Spacing Type | |
Linings |
Stud Size | Stud BMT | Spacing | Bridgings |
{{ rs.size }}mm | {{ rs.bmt }} bmt | {{ rs.spacing }}mm | {{ rs.noggings }} |
Request a quote
Your Distributor: {{ supplier.selected.name }} - {{ supplier.selected.address }} - {{ supplier.selected.postcode }}
Choose one of the nearest distributors
General Notes & Limitations
- Strength check: 1.2G + Wu, using Wu = 0.375kPa
- Serviceability check: G + Ws Limit L / 360 or 12mm, G Limit L/600
- Support walls and connections to be independently checked.
- The live load in accordance with AS/NZS1170.1:2002 Clause 3.5.2 has not been applied to the ceiling joists. Accordingly, personnel are not permitted to traffic the ceiling joists.
- Maximum span tables assume Noggings are equally spaced along studs.
Whilst every care has been taken in the preparation of Rondo Wizards, products and systems do change over time, and interpretations may vary, which means Rondo Building Services Pty Ltd cannot accept liability for the accuracy of information supplied (or lack thereof), or any consequences which happen as a result. Rondo Wizards are intended as a guide only and do not replace professional judgement. Installation of Rondo products must also be in accordance with the Rondo Professional Design Manual which is also available on the Rondo website.