rondo worldwide

Stay connected with Rondo

rondo wall design wizard

Step: {{ step }} of {{ steps }}

Select wall type

Lateral Pressure** {{ lateral_pressure }}

Deflection Limit**


Wall Linings

Are you using a specific Stud Size and/or Spacing?

**Assumed weight of plasterboard is as follows:

10mm Plasterboard (up to 7 kg/m²)

13mm Plasterboard (up to 10 kg/m²)

16mm Plasterboard (up to 13 kg/m²)

Stud Spacing

Stud Size

  Wall Type Non Load Bearing
1 Pressure {{ lateral_pressure }}
2 Wall Height
3 Deflection Limit
4 Linings
5 Stud Spacing Required {{ stud_size_bool ? "Yes" : "No" }}
6 Stud Spacing
7 Stud Size and Gauge

{{ wall_lining }}
Walls connected to the underside of a structure requiring the allowance for deflection must be installed with deflection head track and an additional row of Noggings 100mm down if unlined, or lined one side only.

Request a quote

Your Distributor: {{ }} - {{ supplier.selected.address }} - {{ supplier.selected.postcode }}

Choose one of the nearest distributors

Please note: If your country is not listed we don't service your region.

{{module_selected.split('-').join(' ')}} Steel Stud Walls need to be verified by a Rondo Engineer.

Whilst every care has been taken in the preparation of Rondo Wizards, products and systems do change over time, and interpretations may vary, which means Rondo Building Services Pty Ltd cannot accept liability for the accuracy of information supplied (or lack thereof), or any consequences which happen as a result. Rondo Wizards are intended as a guide only and do not replace professional judgement. Installation of Rondo products must also be in accordance with the Rondo Professional Design Manual which is also available on the Rondo website.